Free delivery over £50

Bulkhead Fittings designed to fit pipework to tanks and other watertight plumbing connections

All Oxford Corals PVC-U pipe and fittings are high quality, approved by the Water Regulations Advisory Scheme and fully reef safe. 
All pipe and fittings are metric and compatible with many other makes of metric pipe with joints connected using solvent weld glue. 
Supplied complete with one rubber and one nylon washer.

These Bulkheads are sized so the correct pipe fits 'inside' of the Bulkhead spigot into both the top and bottom of the fitting, if you require a smaller Bulkhead Fitting you can go down a size (25mm, 32mm, 40mm, 50mm & 63mm only) by using a Socket Coupler to connect your pipework to the spigot end and still provide the correct bore through the Bulkhead. i.e. 40mm Bulkhead with a 40mm Pipe fitted 'inside' of the fitting or 32mm Bulkhead and 40mm Socket Coupler with a 40mm Pipe fitted to the spigot of the fitting.

Pressure: 10 Bar - 145 psi.
Connection: Glue Socket x Male Thread.
Material: PVC-U.
Colour: Grey.
20mm. 78mm L. (44mm Thread) x 40mm W. Minimum Hole Diameter 27mm. 
25mm. 84mm L. (46mm Thread) x 48mm W. Minimum Hole Diameter 35mm.
32mm. 93mm L. (50mm Thread) x 58mm W. Minimum Hole Diameter 43mm. 
40mm. 100mm L. (49mm Thread) x 72mm W. Minimum Hole Diameter 54mm. 
50mm. 114mm L. (52mm Thread) x 90mm W. Minimum Hole Diameter 67mm.
63mm. 123mm L. (54mm Thread) x 95mm W. Minimum Hole Diameter 77mm. 

Write a review

Note: HTML is not translated!
    Bad           Good

20mm Tank Connector PVC-U

  • Brand: Oxford Corals
  • Product Code: 20mm Tank Connector PVC-U
  • Availability: In Stock
  • £11.52